Payment & Shipping Terms:
|Tank Size:||500x300x150mm||Unit Size:||585*330*280mm|
|Package Size:||635*405*335 Mm||Frequency:||40KHz|
|Heating Power:||300W||Heater::||Normal ~80C Adjustable|
|Timer::||1~30min Adjustable||Warranty Time:||1 Year|
|Lead Time:||Immediately After Payment||Ultrasonic Power:||480W|
stainless steel ultrasonic cleaner,
ultrasonic bath cleaner
Quick Cleaning Fast Delivery Degassing Tattoo Equipment Ultrasonic Cleaner
1. Necessity of Tattoo Equipment Ultrasonic Cleaner
Common tools found . clean and sterilize some tattoo machine are generally autoclaves and ultrasonic cleansers.
Just before sterilization, the tattoo machines, needles and tubes must be cleaned completely when each use or at the very least daily. The best and easiest tool to fix a tattoo machine before sterilization is normally ultrasonic cleaner. It might clean all continuing to be tattoo ink include any tiny hole and dead approach without chemical reactions towards the machines.
But keep observe that although the ultrasonic cleansers performance great around killing Escherichia coli and Staphylococcus. But bacteria like HIV may only be sterilized through autoclave sterilizer, that’s why it becomes the sole professional tool for tattoo sterilization.
Effectiveness of Beauty Salon Ultrasonic cleaner over other methods of cleaning
2. How Tattoo Equipment Ultrasonic Cleaner work
Cleaning is provided by cavitation action, which is the implosion of microscopic-sized bubbles in an ultrasonic cleaning solution as they contact the surface of the instruments. It is created by ultrasonic transducers excited to ultrasonic frequencies such as 37,000 cycles per second (37 kHz). The bubbles are small enough to penetrate cracks and crevices impossible to access by hand scrubbing. They safely blast away remaining contaminants.
3.Features of JP-2500
(1)Degas function enhances cleaning effect and reduce oxidation on your Tattoo tool.
(2)Strong power for cleaning tattoo tool
(3)5 times digital time setting to meet your different cleaning requirement.
(5)Suitable frequency for tattoo tool.
4.Why tattoo equipment ultrasonic cleaning is an important first step
tates are implementing regulations governing the operation of tattoo and body piercing parlors much as they have for hair salons and nail salons. For example, Washington state has posted WAC 246-145-060 “Sterile procedures in body art, body piercing and tattooing.” It states in part that as soon as practical after use reusable instruments must be brushed or swabbed to remove foreign material or debris and rinsed.
A suggested follow-on procedure is immersing instruments in detergent and water in an ultrasonic cleaning tank used according to the manufacturer’s instructions. This is followed by rinsing and drying prior to packaging for sterilization. In other words, tattoo parlor instrument cleaning is much the same as used for cleaning medical and surgical instruments.
5.How to clean tattoo tool with Skymen tattoo ultrasonic cleaner?
After pre-cleaning to remove gross contaminants, reusable tattoo equipment can be placed in an ultrasonic cleaner such as the half-gallon capacity 40 kHz Skymen JP-2500. Available from Skymen it has a tank size 248x150x78mm. But first the ultrasonic cleaner must be filled with an approved medical instrument cleaning solution, and degassed to drive off cavitation-inhibiting trapped air. This is accomplished by turning on the unit and letting it operate without a load for approximately 10 minutes or until air bubbles stop coming to the surface.
When everything is ready place the instruments in the ultrasonic cleaner’s mesh basket, taking care that they do not come in contact with each other. Lower the basket in the solution and set the timer as recommended by the manufacturer.
At the end of the cleaning cycle remove and visually inspect the instruments to be certain all residues are removed. Rinse and dry them prior to sterilization.
|Tank capacity||22L||Timer||1-30 mins|
|Tank size||500x300x150mm||Unit size||585*330*280mm|
|Box packing||635*405*335 mm||Function||Degasing/Draining|
|Ultrasonic power||360W||Heating power||300W|
AC 100 ~ 120V, 60Hz ; AC 220 ~ 240V, 50Hz
If this tank size is not suitable for your dental tool cleaning, we have other smaller or bigger machine for you to choose.Please check other model below:
9. Skymen Policy For Distributor
We are only specializing in designing and producing ultrasonic cleaner so we need our partners in medical industry,always!
We will keep our quality and competitive price for our distributor.
If you would like to cooperate with us, please contact me directly.
10. Skymen Advantage
We have been in this industry for 10 years and we are supplying machines to all seller all over the world.All distributor is welcome for win-win coperation.
We have passes ISO,High Tech Company,CE,RoHS,FCC, National Medical Instrument Approval.
Contact Person: Nikki Pan