Stainless steel SUS Ultrasonic Carburetor and Engine Parts Cleaner

Ultrasonic Carburetor and Engine Parts Cleaner

• Cleans carbon deposits from carburetors and all manner of engine parts
• Removes stubborn oil, grease, lubricants, paint, rust, and dirt (with pre-cleaning in some cases)
• Penetrates deep into the part and cleans holes, small apertures, and crevices
• Cleans sensitive parts like wiring and plastic without damage
• Does not require ‘line-of-sight’ for effective cleaning
• Ensures part longevity due to high degree of cleanliness

Features:

Suitable for All Types of Engine Parts

ultrasonic cleaners effectively and thoroughly clean all types of engine parts:

Automotive: Thoroughly removes carbon deposits, grease, and other types of dirt and contaminants from carburetors, exhaust manifolds, cylinder blocks, 2-stroke and 4-stroke motorcycle engines, snow machines, ATV cylinders and heads, and more.

Marine: Suitable for inboard and outboard motors, the cleaning chemistry is both thorough and gentle on aluminum parts, reducing the risk of future corrosion.

Aircraft: The high performance demands of aircraft engines establish the need for an intensive cleaning process that will restore the engine part to near original condition. Our ultrasonic units easily, thoroughly, and safely clean both large and small parts. Turbine blades, fuel nozzles, generator components, brakes and other parts that require periodic cleaning are all effectively and thoroughly cleaned using the ultrasonic cleaning process.

Specificatoin:

From 10 galles to 200 gallons ,size could be customized

A major challenge of any cleaning system is the difficulty faced in tackling tiny spaces, intricate geometries, and difficult to reach surfaces. Ultrasonic cleaning penetrates even blind holes and small apertures that previously had hit-and-miss success rates. The uniform agitation of the cleaning solution ensures that the cleansing action penetrates even hard to reach areas that previously required specialized brushes and other complicated cleaning devices with no real guarantee of a successful and consistent cleaning outcome. Various factors go into determining which combination of an ultrasonic unit and chemical solution is suited to your particular requirement.

The whole set machine including:

1* cleaning machine

1* lid

1* basket

1* generator;

How to use an ultrasonic cleaner ?

Cleaning prior to lacquering

Ultrasonic clean 130° F, 2 to 3 minutes, 38 to 40 kHz sweep, 300 Hz sweep rate
Chemistry, Brulin 815GD, 12 ounces per gallon of water
Spray rinse with de-ionized* water to remove gross detergent
Immersion rinse in flowing warm de-ionized* water (30 seconds)
Spray rinse with de-ionized* water (final rinse)
Blow dry with clean compressed air or dry nitrogen

Cleaning to remove calcium buildup (replaces "chem-clean")

Ultrasonic clean <110° F, 2 to 3 minutes, 38 to 40 kHz sweep, 300 Hz sweep rate
Chemistry, Ultra-power 132, 1 to 1½ ounces per gallon of water
Spray rinse with de-ionized* water to remove gross detergent
Immersion rinse in flowing warm de-ionized* water (30 seconds)
Spray rinse with de-ionized* water (final rinse)
Blow dry with clean compressed air or dry nitrogen

Before and after :