Payment & Shipping Terms:
|Color:||Gray, Gold, White||Tank Material:||SUS304|
|Timer:||5 Digital Timer Settings||Ultrasonic Power:||60W|
|Special Function:||Degassing||Application:||Nail Tool Cleaning|
stainless steel ultrasonic cleaner,
ultrasonic cleaning equipments
2L Fast Removing Contaminant Digital Ultrasonic Cleaner For Nail Salon
1. Necessity of Nail Salon Ultrasonic Cleaner
Regulations covering cleaning implements used in nail spas can often be met by first immersing manicure tools and pedicure tools in an ultrasonic cleaner to remove gross contaminants that may be picked up during clipping and filing then adhere to tool surfaces. These contaminants can cause mycobacterium and staph infections as well as fungal infections. Following ultrasonic cleaning tools are disinfected or sterilized before being stored for future use.
Effectiveness of Nail Salon Ultrasonic cleaner over other methods of cleaning
2. How Nail Salon Ultrasonic Cleaner work
The first step is to fill the ultrasonic cleaner tank with a safe, biodegradable ultrasonic cleaning bath, which can be formulated by adding a 1-ounce tube of CLN-LR012 per gallon of water. After rinsing the tools with water, they are placed into the unit’s mesh basket. The unit is turned on, degassed by operating for about 30 minutes (or 10 minutes if the unit has a Degas mode), and the basket is lowered into the bath for the actual ultrasonic cleaning process.
Rapid, thorough, quiet cleaning is accomplished by ultrasonic energy. This is produced by the unit’s ultrasonic generator and transmitted into the ultrasonic cleaning bath by transducers mounted on the bottom of the tank. The process creates billions of microscopic bubbles that implode with great force when they come into contact with the implements being cleaned. The action is called cavitation. It blasts dirt and contaminants away without damaging the implements. Bubbles penetrate the tiniest cracks and crevices that are virtually impossible to clean by manual soaking and scrubbing. After being cleaned the implements are rinsed, sanitized and stored.
The intuitive control panel on the ultrasonic unit allows operators to set ultrasonic cleaning time and bath temperature in accordance with the load being cleaned. SKymen units have knobs that are turned to the appropriate time and temperature settings. Despite their simple appearance, these units are fully microprocessor controlled. Other manufacturers offer analog and/or digital controls and displays.
3.Features of JP-010T
(1)Degas function enhances cleaning effect and reduce oxidation on your Nail instrument.
(2)Strong power for cleaning Nail instrument.
(3)5 times digital time setting to meet your different cleaning requirement.
(5)Suitable frequency for nail instrument.
4.Why nail salon ultrasonic cleaning is an important first step
Based on accepted procedures used to clean dental and surgical instruments many states are now requiring nail spas to include ultrasonic cleaning as the first step in cleaning, then sanitizing or sterilizing their manicure and pedicure tools. That’s because the sonication that occurs in these cleaners safely and quickly removes adhering particles not easily dislodged by manual scrubbing. Manually cleaning these tools, by the way, risks chance of injury from points and sharp edges.
5.How to clean Nail tool with Skymen nail salon ultrasonic cleaner?
Skymen ultrasonic cleaners are compact, efficient and quickly accomplish pre-sterilizing nail spa implements. An example for a small-to-medium sized nail salon is the 2.5L capacity.JP-2500 equipped with a lid, heater, timer and basket. These cleaners are available in several sizes to accommodate larger manicure and pedicure salons.
A recommended cleaning solution concentrate is enzymatic MedClean C7 formulated for medical and surgical instruments and available in gallon containers. This dilutes to 1 to 3 ounces per gallon of water making it not only effective but also an economical choice. Recommended solution temperature is approximately 50C. Here’s a suggested setup and operating procedure:
Sonic cleaning involves the implosion of millions of microscopic bubbles on the surface of the instruments to blast away contaminants. At the end of the cycle remove the instruments. After rinsing they are ready for disinfecting or sterilizing.
Cleaning solutions should be replaced on a regular basis according to applicable regulations for nail salons. Rinse the tank with fresh water before preparing a new bath.
Call the iUltrasonic cleaning experts at 973-440-2191 for answers to your questions on equipment and procedures for cleaning manicure tools and pedicure tools.
|Tank capacity||2.5L||Timer||5 digital time setting|
|Tank size||248*150*78 mm||Unit size||290*223*185 mm|
|Box packing||360*270*245 mm||Function||Degasing/Power switch|
|Ultrasonic power||120W||Heating power||100W|
AC 100 ~ 120V, 60Hz ; AC 220 ~ 240V, 50Hz
If this tank size is not suitable for your dental tool cleaning, we have other smaller or bigger machine for you to choose.Please check other model on our website:www.skymen.cc
9. Skymen Policy For Distributor
We are only specializing in designing and producing ultrasonic cleaner so we need our partners in medical industry,always!
We will keep our quality and competitive price for our distributor.
If you would like to cooperate with us, please contact me directly.
10. Skymen Advantage
We have been in this industry for 10 years and we are supplying machines to all seller all over the world.All distributor is welcome for win-win coperation.
We have passes ISO,High Tech Company,CE,RoHS,FCC, National Medical Instrument Approval.
Contact Person: Nikki Pan