4 Bins Industrial Ultrasonic Cleaner Rinsing Filter Spray Dryer 264L For Turbine Fuel Nozzle

4 bins Ultrasonic Cleaning Machine for turbine fuel nozzle with Rinsing, Filter, Spray, Dryer 264L

Why we use filter(filtration cycle system)
Cleaning of the manufacturing industry Cleaning of the manufacturing industry usually requires a large amount of solvent to remove grease and dust on the surface of the part. Usually, a large amount of solvent and detergent are used to remove the grease and dust on the surface of the part. However, the use of solvents and detergents inevitably increases the amount of water, which increases the cost of cleaning and is not environmentally friendly.
The circulation filtration system effectively reduces the cleaning cost, greatly reduces the discharge of wastewater, and achieves the purpose of sustainable recycling of cleaning water.

The role of the lifting device:
When you clean the items, it is more difficult to put the items in or out of the washing tank. The lifting system can solve this difficulty very well, just start the button, the object will automatically immerse and lift the sink, very labor-saving.

Specification

Same series with different size for your choice:

Images:

Clean effect:

Spray and Rinsing:

Parts that are cleaned of large amounts of dirt are generally pre-cleaned by dipping, spraying, etc. After removing most of the dirt, the remaining dirt is ultrasonically cleaned, and the effect is good. If you clean small items and complicated shapes (parts), if you use a cleaning net or rotate the cleaning object, you can use ultrasonic radiation while vibrating, and you can get even cleaning.